ADM7001 |
RFQ for ADM7001 Required Field |
 |
| Technical/Catalog Information | ADM7001ACT1 |
| Vendor | Infineon Technologies |
| Category | Integrated Circuits (ICs) |
| Controller Type | Ethernet Switch Controller |
| Interface | Serial |
| Voltage - Supply | 3.135 V ~ 3.465 V |
| Current - Supply | - |
| Package / Case | 48-LQFP |
| Packaging | Tray |
| Operating Temperature | 0°C ~ 115°C |
| Lead Free Status | Contains Lead |
| RoHS Status | RoHS Non-Compliant |
| Other Names | ADM7001ACT1 ADM7001ACT1 |
| Product | Manufacturers | Pack | D/C |
| ADM7001 | - | QFP | 05+ |
ADM7001 integrates 100Base-X physical sub layer (PHY), 100Base-TX physical medium dependent (PMD) transceivers, and complete 10Base-T modules into a single chip for both 10 Mbps and 100 Mbps Ethernet operations. It also supports 100Base-FX operation through external fiber-optic transceivers. The device is capable of operating in either full-duplex mode or half-duplex mode in either 10 Mbps or 100 Mbps operation. Operational modes can be selected by hardware configuration pins, software settings of management registers, or determined by the on-chip auto negotiation logic.
The 10Base-T section of the device consists of the 10 Mbps transceiver module with filters and a Manchester ENDEC module.
Features |
| • IEEE 802.3 compatible 10BASE-T and 100BASE-T physical layer interface and ANSI X3.263 TP-PMD compatible transceiver• Single chip, integrated physical layer and transceivers for 10BASE-T and 100BASE-TX function.• Medium Independent Interface (MII), Reduced MII (RMII) and General Purpose Serial Interface (GPSI) for high port count switch• Built-in 10Mbit transmit filter• 10Mbit PLL, exceeding tolerances for both preamble and data jitter• 100Mbit PLL, combined with the digital adaptive equalizer and performance up to 120 meters for UTP 5.• 125MHz Clock Generator and Timing Recovery• Integrated Base Line Wander Correction• Carrier Integrity Monitor function supported• Support FEFI when Auto Negotiation disabled• Support Auto MDIX function for Plug-and-Play |
| Symbol | Parameter | Rating | Units |
| VCC33 | 3.3V Power Supply | 3.0 to 3.6 | V |
| VCC25 | 2.5V Power Supply | 2.25 to 2.75 | V |
| VIN | Input Voltage | -0.3 to VCC33 + 0.3 | V |
| Vout | Output Voltage | -0.25 to Vcc25 + 0.25 | V |
| TSTG | Storage Temperature | -55 to 155 | °C |
| ESD | ESD Rating | 2000 | V |
| PC | Power Consumption | 0.5 | W |
